Welded Wire Mesh
A SS welded wire mesh, panel and roll, electro/hot-dip galvanized or PVC coated, to ASTM A1064 and ISO 16120, for construction and industrial use.
Product Introduction
Welded Wire Mesh Panel, Welded Wire Roll, Electro-Galvanized Welded Mesh, Hot-Dip Galvanized Welded Mesh, Stainless Steel Welded Mesh, PVC Coated Welded Mesh, Concrete Reinforcement Welded Mesh
Applicable International Standards
ASTM A1064/A1064M, ASTM A185/A185M, ASTM A853, ISO 16120, ISO 9044, EN 10002-1, EN 10244-2, DIN 1543
Standard Material Grades
AISI 304/304L, AISI 316/316L, Low Carbon Steel (Q195, Q235), Electro-Galvanized Steel, Hot-Dip Galvanized Steel, PVC Coated Steel
Core Technical Parameters
Wire Diameter: 0.45mm to 6.0mm (16 SWG to 4 SWG);
Mesh Opening: 6.35mm × 6.35mm to 200mm × 200mm;
Tensile Strength: 450-700MPa (carbon steel);
Yield Strength: 350-550MPa;
Weld Shear Strength: Min. 35% of wire ultimate tensile strength;
Zinc Coating: 10-275 g/m² (electro/HDG);
Panel Size: Width 0.5-2.5m, Length 1-30m;
Aperture Tolerance: ±2-3mm